Technical Ceramics

Custom technical ceramics for industry

Development of Prototypes

Small and Medium Series

Technical Consulting

advanced ceramics for research and industry

Production Process

  • Raw materials: Micro or Nano
  • Material preparation: Conditioning, Mixing, Microning, Spray drying
  • Forming: Uniaxial Pressing, Cold Isostatic Pressing (CIP), Slip Casting
  • Green Machining: Miling, Turning, Drilling
  • Sintering: Debinding, presintering, sintering (up to 1.800ºC)
  • Finishing: Grinding, Lapping, Polishing
  • Quality Control - Mechanical tests Controls: optical, dimensional, structural integrity through penetrating liquids

Whatever you need, we can develop a new ceramic for it

Previous
Next

Materials & Properties

ALUMINA
  • High purity and density
  • Excellent dielectric
  • High thermal conductivity
  • High corrosion resistance specially in the field of sea water treatment
  •  Good dielectric
  • High mechanical strength
  • Wear resistance
  • High temperature resistance
  • High hardness 
  • Good thermal conductivity
Alumina 96%
  • Good resistance to abrasion
Alumina ZTA
  • Good dielectric
  • High toughness
  • Excellent resistance to high temperatures
  • Excellent corrosion resistance tostrong acids, and strong alkalis
  • High mechanical strength
  • Biocompatibility
ZIRCONIA
  • High mechanical strength
  • High toughness
  • High impact resistance
  • Excellent wear resistance
  • Excellent corrosion resistance
  • Biocompatibility
Zirconia Y-PSZ
  • High purity and density
  • Good corrosion resistance
  • Good compromise between oxygenconductivity & mechanical properties
Zirconia Y-FSZ
  • High purity and density
  • Good corrosion resistance
  • High oxygen conductivity
  • High temperatures resistance
Zirconia Mg-PSZ
  • High purity and high strength
  • High resistance to thermal shock and erosion
  • Low thermal expansion and non-wettability
Zirconia ATZ
  • Good dielectric
  • High thermal conductivity
  • High mechanical strength and stiffness
  • Excellent corrosion resistance to strong acids,and strong alkalis
  • Biocompatibility
OTHERS
Aluminum Titanate
  • Excellent thermal shock resistance
  • Good corrosion resistance
  • Insulating properties
  • Very low wettability by non-ferrous melts
  • Good wear resistanc
Tungsten Carbide
  • With or without alloys
  • High hardness
  • High wear resistance
  • High impact resistance
Composites for E.D.M
  • Zirconia or alumina based materials electrodischarge machinable

Process - Key benefits

  • Ultra-short sintering cycles
  • High reproducibility
  • Safety and reliability MaterialObtention of materials with compositions and properties not obtainable up to now (density, hardness, stiffness, lifetime, etc…)

Spark plasma sintering (SPS)

Innovative sintering process based on a
modified hot pressing setup in which an
electric current runs directly through the
pressing mould (typically graphite) and
the component. By means of the pulsed
electric current and the “spark plasma
effect”, very rapid heating times and short
process cycles are achieved.

What do you need?

We can certainly help
Contact us

Subscribe to our newsletter!

We promise we’ll never spam! Take a look at our Privacy Policy for more info.